DE EN

ZF 8HP – Jerk when starting, gear does not engage

Original post

0
Auto-translated

Possible causes: oil level too low or expired oil, wear of the multi-plate clutches (e.g. K1/K2), defective solenoids or pressure sensors. Check the oil change and oil level, then read out the fault memory.

Machine translation — may contain errors.

Edited: 27.09.2026 06:15

Replies (1 reply)

Page 1 of 1
0
Auto-translated

Some 8HP designs have known weak points (e.g. loss of oil tightness on certain sealing rings). Repair kits and overhaul parts available from ZF or specialist companies.

Machine translation — may contain errors.

Edited: 27.09.2026 06:15

Page 1 of 1

You are viewing as a guest. Read-only — please log in or sign up.